BH5 Loading Dock Leveler Options
Beacon® BH5 OPTION
Call for custom quote for your application
BH5 OPTION | |||
Model No. | Description | Price | |
1) BH5-HL18 | Lip 18" (14" Projection) | $332.31 | |
2) BH5-HL20 | Lip 20" (16" Projection) | $440.86 | |
3) BH5-664 | Independent Lip Control | $590.48 | |
4) BH5-AD-16 | 16" Above Dock Service. | $864.01 | |
5) BH5-1518-PL | Selector Switch In Lieu of touch screen control panel (115 Vac, 1 Ph, 60 Hz.) | $134.36 | |
6) BH5-535 | Emergency Stop Feature | $861.24 | |
7) VERSA-PANEL | OPTION - Versa Panel with NEMA 12 enclosure: A single control station for the BHD5 or BH5 hydraulic dock leveler and BEVR650 electric truck restraint; overhead door control is included. Price is based on substituting BHD5 or BH5 and BEVR650 control box. | $4,702.27 | |
8) BH5 - 50 Hz | 3 Ph. 50 HZ Option to run Hydraulic Dock Leveler. | $2,263.84 | |
9) BH5-3PH | 3 Phase Motor | $Call | |
10) BH5-N5 | NEMA 4 Control Station Box | $686.77 | |
11) BH5-KLO | Key Lock Out for control panel. | $398.77 | |
12) BH5-WS-6 | Weather Seal option includes brush weather seals on both sides and foam filled in rear for a 6’ long leveler | $265.85 | |
13) BH5-WS-8 | Weather Seal option includes brush weather seals on both sides and foam filled in rear for a 8’ long leveler. | $310.16 | |
14) BH5-WS-10 | Weather Seal option includes brush weather seals on both sides and foam filled in rear for a 10’ long leveler. | $354.46 | |
15) BH5-393 | Foam Insulation | $2,696.14 | |
16) BH5-AS-10 | Abrasive Surface for a 10’ leveler. | $327.88 | |
17) BH5-531 | Yellow and Black Diagonal Striping on Sides | $94.38 | |
18) BH5-PAN-6 | Self-forming Pan with bottom (leveler welded in) for a 6’ leveler. 270 lbs. | $2,024.88 | |
19) BH5-PAN-8 | Self-forming Pan with bottom (leveler welded in) for a 8’ leveler. 350 lbs. | $2,113.49 | |
20) BH5-PAN-10 | Self-forming Pan with bottom (leveler welded in) for a 10’ leveler. 430 lbs. | $2,419.22 | |
21) BH5-EZ-6 | EZ Pan (Self-forming, no bottom) assemble at job site on concrete slab - for a 6’ leveler. 220 lbs. | $1,134.28 | |
22) BH5-EZ-8 | EZ Pan (Self-forming, no bottom) assemble at job site on concrete slab - for a 8’ leveler. 260 lbs. | $1,471.03 | |
23) BH5-EZ-10 | EZ Pan (Self-forming, no bottom) assemble at job site on concrete slab - for a 10’ leveler. 300 lbs. | $1,754.60 | |
24) BH5-G-6 | Guardian Safety Barrier Lip - for 6' wide dock leveler | $5,363.48 | |
25) BH5-G-6.5/7 | Guardian Safety Barrier Lip - for 6-1/2' and 7' wide dock leveler | $5,065.42 | |
26) BH5-WO | Leveler without Standard Bumpers | $-46.52 | |
27) BH5-3W-6X6 | 3-Wheel Forklift Option for 6' wide units - 3/8" deck | $647.19 | |
28) BH5-3W-6X8 | 3-Wheel Forklift Option for 6' wide units - 3/8" deck | $920.23 | |
29) BH5-3W-6X10 | 3-Wheel Forklift Option for 6' wide units - 3/8" deck | $1,262.36 | |
30) BH5-3W-6.5/7X6 | 3-Wheel Forklift Option for 6.5' and 7' wide units - 3/8" deck | $900.00 | |
31) BH5-3W-6.5/7X8 | 3-Wheel Forklift Option for 6.5' and 7' wide units - 3/8" deck | $1,033.15 | |
32) BH5-3W-6.5/7X10 | 3-Wheel Forklift Option for 6.5' and 7' wide units - 3/8" deck | $1,139.33 | |
BH5 FINISH OPTION | |||
Model No. | Description | Details | Price |
33) BH5-P | BH5 Dock Leveler - Primer | Sherwin Williams Rust Inhibitive Primer. (Does not prevent Rusting, it inhibits it). | $1,174.16 |
34) BH5-PCF | BH5 Dock Leveler - Powder Coat Finish | Applied electrostatically and then cured under heat. Powder coated surface is more resistant against scratches, chipping, wear and fading compared to paint. Difficult to touch up. | $8,418.52 |
35) BH5-GAF | BH5 Dock Leveler - Hot Dip Galvanize Finish | (Note: Hot Dip Galvanizing the Leveler can cause Warping of the Dock Leveler or cause a Bubble to form in the Deck), the unit is upgraded from the standard ¼” to ⅜” top deck to help mitigate the bubble issue when the galvanize is ordered. | $10,545.30 |
36) BH5-EZ-P | EZ Pan - Primer | Sherwin Williams Rust Inhibitive Primer. (Does not prevent Rusting, it inhibits it). | $1,384.62 |
37) BH5-EZ-PCF | EZ Pan - Powder Coat Finish | Applied electrostatically and then cured under heat. Powder coated surface is more resistant against scratches, chipping, wear and fading compared to paint. Difficult to touch up. | $510.36 |
PROP 65 WARNING
For California Residents: www.P65Warnings.ca.gov
Products on this page may lead to cancer or reproductive harm.