Hydraulic Loading Dock Lift

Beacon® BEHLTG-D Series

Product Details

• Construction: Heavy duty steel construction allows for years or reliable service. Features a small 12" fold down bridge on hinge end and electric toe guard on roller end. Hand rails on both sides and safety chains on both ends.
• Size: Overall frame width is wider and longer than the deck platform to allow for leg set on each side. The 44" wide deck platform has a frame width of 67 -1/6", the 52" wide deck has an frame width of 75-7/16”. Deck length is 83-5/8".
• Service Range: Deck lowered height 1/2", Deck raised height 54".
• Overall Length: The side frame structures are longer than the deck, taking into consideration when analyzing the 12" bridge length to see if this is the correct equipment for your application.
• Electrical: Controls: Low voltage pendant hand control on a heavy duty coil cord connected to remote external power unit.
• Powered: 2 HP. Remote motor, pump, reservoir power unit with plastic cover.
• Power: Primary Voltage: 460 Vac, 3 Ph, 60 Hz.
• Installation: Surface mount
• Color: Blue frame with yellow hand rails.
• Usage: Hydraulic Loading Dock Lift is designed for inside use to lower and raise pallet jacks or hand trucks at an internal loading dock without requiring a pit.
• Capacity: 3,000 lbs. (uniform load).
• Standard: Maintenance Safety Prop Device included in base frame.
• Options: Primary Voltage: 220 Vac, 3 Ph, 60 Hz. Or 115 / 208 Vac, 1 Ph, 60 Hz.
• Note: Keep clean under deck as a maintenance service practice for low surface application.